The hose from the oil separator breather (the pipe in the front of
the engine) to the outlet on the Z-S carb on my 79B is a doozie to
replace. On the carb end, it takes about a 1/4" hose, on the engine
end, it takes about a 1/2" hose.
Can't find any hose to replace it! Right now it's a composite of
different size hoses loosly clamped together (not OEM!). Moss
suggests a hose (their number 182-188), but it only fits on the carb
size and is too small to go over the breather pipe.
Any suggestions?
Frank Sperling
79B "Mugs"
|