Sorry for the advertisement but I've got to get this info out to those who
are in need of more power. I am the MAKER of this head. Some others have put
ads in other publications even before I have the head finished.
I will have the finished head in my hands Sept 5 along with the DCOE manifolds.
The SU manifolds will be out approx 1-2 weeks later. The heads will go
faster then I can get them from the foundry so....
Thanks for your patience. I know that these heads are everything that they
seem.
MGB/MGA crossflow heads for the 1800cc-1500cc engines. A bolt on 25%-40%
increase in power and flow over the HRG head.
BARE HEADS INCLUDE
*Four intake ports on the spark plug side of the head
*Hardened valve seats
*stepped Bronzonium guides
*high temp aluminium alloy
*all ports for YOUR thermostat housing, temp sending unit, and exhaust system.
*will use stock valves(In-1.625" Ex 1.344"), springs and rocker assy.
*ports for air rail(if needed)
*servo ports if needed
Manifolds Avalible
*Twin 40mm or 45mm DCOE's
*Twin 1 1/2" or 1 3/4' SU's
*Single DGV
Kits
001-SU
Stock valves
Stock springs
Rebuilt rocker assy.
SU manifold
001-DC
as above except with DCOE manifold
001-DG
as above except with DGV manifold
PRICES
Bare heads US$1450.00
Kit 001-SU US$1825.00
Kit 001-DC US$1850.00
Kit 001-DG US$1800.00
Competition springs add $35.00
Roller rocker with kit add $250.00
WD and jobber pricing avalible
Contact
Steve Darby
Sports Cars International
6405 Cochiti SE
Albuquerque NM 87108
505-268-6898
E-mail elan@indirect.com
thanks
Steve
|