mgs
[Top] [All Lists]

Midget

To: mgs@autox.team.net
Subject: Midget
From: roethler@cadetmail.uscga.edu (Brust)
Date: Mon, 29 Jul 1996 21:55:03 -0500
Hey folks, in about 5 or 6 months I am going to begin the restoration of my
64 Midget--- I basically have it down to the body shell and had the body
shell dipped, but now need some advice about some sections of the
restoration......

1)Suspension:  does anyone know of a relatively clean, inexpensive front
suspension besides stock?  I would like to be able to adjust camber and
shock settings (ride height and castor would also be great bonuses).  I
have tried to design in my head a double A-arm setup with coil over shocks,
but am not sure how to create something like that, or where to find specs
on shocks... any ideas would be greatly appreciated.  I plan to run 14"
panasports, so I need it to ride about stock height but with much heaver
springs....?!  Bad idea?  How about the rear suspension?  Anyone know a way
to convert the rear to coil over?  I can't afford Huffaker but if anyone
knows of anyone else who has done this before?  

2)Order of attack-- should I trailer the car to the painter right off the
bat?  Should I assemble the suspension first?  Or have them prime and paint
the underbody, then put it together and go back to have them paint the
final job?  

3)Bonnet--  I would like to get a fiberglass bonnet-- anyone done this
before?  I would like to have it fold forward so I need ideas on
mounting...

4)Brakes-- I want to get the Mini Mania big brake setup- anyone try this
yet?  Would it be wise to have on a street car?  How about the pads-- do
they ruin the wheels with dust?  Should I get a brake servo?

5)Differential-- I will be using this for street/autox, so can anyone
recomment a limited slip-- i have heard of the clutch type and the quaife-
Im tempted to go with the quaife but really don't have a clue which is
better than the other--?


    Any suggestions that you can give which will make this easiest for me
to complete would be greatly appreciated-- anyone who has done this sort of
thing before that can offer advice in the restoration process would be of
great help--  I will undoubtedly need some help in the future.... thanks in
advance

Brust Roethler




<Prev in Thread] Current Thread [Next in Thread>
  • Midget, Brust <=