>Just happen to have two new, still in the box, Lucas dizzy
>caps for the 'A' ... same as on the 18G/18GA/18GB...
>set the ohm meter to Rx1K ... and was able, after a little
>wiggling of the probes, to get 0 ohm resistance between
>the screw for the coil wire and the spring loaded contact
>for the rotor.
>
Thanks Larry,
The best I could do was 21K at the same junction. As you suggest a new cap
fixed me right up. Unfortunately the old one won't serve as a spare. It's
only future is as a desk top pencil holder.
Cheers,
___ \______ Ross MacPherson
/ __ \ __ / /------|) arm@unix.infoserve.net
/ (___)---------/ (___) Vancouver, Canada
1947 MG-TC 3528 1966 MGB-GT (running, but not ready....)
|