Need to reconstruct the wiring harness for the overdrive unit. This is new
territory for me, so I could use some guidance/wisdom.
There appear to be three points for electric connection. One is a dual-pole
switch on the left of the tranny, there's a smiliar one to the right, and a
single-pole connector on the right hand side of the gear tower.
Realizing the yellow wire in the bundle at the firewall is the power for the
circuit - what constitutes the harness. From the GT I parted out this past
winter, I was able to salvage the remnants of what I believe was this
harness. That old GT was originally equipped with OD, but whomever removed
the engine, chose to chop this harness. What's left are two green wires, and
a yellow/red.
Where on the unit is the selenoid?
Can anyone provide a) advice, b)a diagram,c) a complete OD harness, firewall
to tranny?
All and any assistance would be appreciated.
Cheers from the sun-drenched Atlantic coast of Canada!
Terry
'70 GT
'68 roadster
(sniff..this space for rent)
|