In a message dated 96-05-22 08:58:39 EDT, you write:
>
>I have all of the turn signal lights, brake lights, and side markers removed
>from my 78B for painting. The body shop is only a short drive away.
>
>Would the brake lights and turn turn signals function correctly if I were to
>put
>only those lights back on in order to drive the car to the body shop? Last
>night when I tried this, both turn signals would turn on at the same time.
>Brake lights were only dim. Do I have something hooked up wrong or do the
>disconnected wires cause malfunctions?
>
>
Most likely a bad ground someplace. B's use a sort of unusual grounding
system for the lights (headlamps and taillamps use the same ground, for
instance, on some models). Try getting a good ground connexion and all should
be well.
Corey
75 MGB 'Rags'
|