The same is true for the B, as well. And don't forget that the clutch has
the same type of linkage at the MC and at the slave.
-- \/
Shel Bercovich '74 B-GT sbercovich@cbe.ab.ca /\
Join the Trail Riders of the Canadian Rockies (Non-Profit) / \
"Come Ride with Us in Banff National Park" / /\ \
On Tue, 27 Feb 1996, James R. Ferguson wrote:
> At 12:39 PM 2/27/96 EST, you wrote:
> >The problem might not be hydraulic but mechanical adjustments. Before you
> >spend the money to have work done on the MC try looking at two mechanical
> >adjustments.
> Check the fit of the clevis pin in the MC pushrod also the pedal bushings
> and particularly the whole in the pedal at the MC. I've found them worn
> almost twice proper diameter on an MGA. It puts a LOT of slop in the system.
|