At Tue, 5 Dec 1995 09:40:22 -0800, Stan Fickes writes:
> The DPO of my Sprite had cut large round holes for what was once a pair of
> speakers in mine. I bought some thin plywood, a piece of black vinyl and
> some 1/2" foam rubber. I cut the wood to shape, covered it with the foam
> and vinyl (staple the vinyl in place) then blind riveted it into place from
> the inside of the boot. It looks perfect and no screws intrude into the
> passenger side. It was cheap too!
That sounds pretty decent. My [admittedly more expensive] idea was to use a
nice thin piece of stained hardwood cut to fit and then mounted with
shined/buffed stainless steel hardware. I think of it as a chance to practice
for the dash.
--
| Matt Liggett <mliggett@indiana.edu> |
| http://seven.ucs.indiana.edu/~mliggett/ |
|-------------------> Bloomington, Indiana, USA <--------------------|
| 1974 Ford Bronco Ranger 1970 MG Midget 1978 Honda Civic 1200 |
|