On Nov. 21 Larry Colen wrote:
.
I am going to want to install a Panhard Rod on my '69 MGBGT.
Are there any good kits that anyone can reccomend?
Also, I have heard that a trick conversions for TR-6's is to=20
install 240-Z finned brake drums. As both of these cars have the
same bolt pattern as an MGB, does anyone one know if brake=20
drums cross over as well?
I use the 240 drums on my tr4. I had to open up the center hole slightly =
(about 20 thou, used a Dremel!!) and also grind a tiny bit off the tabs =
of the brake shoes. Also check for interference between the drum and the =
backing plate. Overall the "Alfin" type drum is close but not exactly =
the required size. The bolt pattern, on the other hand, is the same.
|