mgs
[Top] [All Lists]

RE: Kingpin question...

To: "'MG Group'" <mgs@autox.team.net>
Subject: RE: Kingpin question...
From: "J. Michael Roach" <mroach@socketis.net>
Date: Wed, 20 Sep 1995 22:04:50 -0500
No matter what you try, it will take at least four (4) times longer than =
expected.  Stick with it, though.  Front ends aren't all that difficult. =
 As soon as you get done, take it in for the best alignment you can get. =
 Don't worry what it costs.

----------
From:   Bart Schwartz[SMTP:bschwartz@dttus.com]
Sent:   Wednesday, September 20, 1995 5:29 pm
To:     mgs@autox.team.net
Subject:        Kingpin question...

     I seem to remember a thread awhile back when someone mentioned that =

     his LBC handled like a truck.  I am having a similar problem with =
my=20
     '76 Midget.  The guy at the garage said I need a new kingpin =
because=20
     mine is bent.  In light of that,  I have few questions:
    =20
     1) Is the kingpin the likely culprit of my steering problems or =
will=20
     other parts need to be replaced as well?
     2) How much should a new kingpin cost?  I think VB wanted $80.  =
Could I=20
     pick up a good used one?
     3) How difficult should it be to put a new one on?  Do I need any=20
     special tools?  Am I going to be half way through this and realize =
I=20
     have to have the car towed because I can't get the wheel back on?
    =20
     I am a little concerned about trying this myself because it took me =

     about 4 hours just to figure out how to put a new alternator in.  =
I'm=20
     still learning where everything is.
    =20
     Any help will be greatly appreciated.
    =20
     Bart
    =20
     ****************************************************************=20
     *                                                              *=20
     * Bart Schwartz                 Internet:  bschwartz@dttus.com *=20
     * 1976 Midget 1500              CServe:    75753,2550          *=20
     *                                                              *=20
     *                                                              *=20
     ****************************************************************




<Prev in Thread] Current Thread [Next in Thread>