mgs
[Top] [All Lists]

Re[2]: 77B Won't Start

To: visprod@whc.net,
Subject: Re[2]: 77B Won't Start
From: SCHLINING.M.W-_at_BALT.PO.017@smtpgty.bwi.wec.com
Date: Thu, 10 Aug 95 16:26:57 EST
     This thread has been going for awhile, but first look at the most 
     simple thing you can that could cause this type of failure.  The 
     distributor is the most likely to cause this out of phase condition.  
     Since it appears to have been a catastrophic type of failure, is the 
     distributor shaft or its gearing broken?  How about the distributor 
     plate not being secure?  Since it a contactless distributor what 
     controls the spark pulse?  Simple things first and then if they are 
     alright, look at your cam and timing chain
     
     
     Marty Schlining
     57 MGA Coupe
     75 MGB


______________________________ Reply Separator _________________________________
Subject: Re: 77B Won't Start
Author:  "Christopher W. Reichle" <Christopher.W.Reichle@students.miami.edu> at 
BALT.SMTP
Date:    8/10/95 3:49 PM


Sounds bad...
Do a compression check and a vacuum test. It sounds like you may have a 
valve train problem. I would guess that you will have low compression and 
your vacuum test will show regular spikes (if you can get it running). 
Sounds expensive. Let me know what you find out from the tests.
     
Chris Reichle 
     
On Thu, 10 Aug 1995, Visual Productions wrote:
     
> My recently-purchased '77B has become quite a headache. I wouldn't 
> try so hard to keep the thing on the road if it didn't look so good. 
> 
> Here's the progression of events:
> A few weeks ago the car started to run rough. It would occasionally 
> misfire or suffer a loss of power when I would accelerate to highway 
> speeds or to climb hills. This happened, by the way, the day after it 
> passed Texas' safety & emissions inspection for the first time.
> 
> The misfire and loss of power turned to horrible backfiring and 
> sometimes flames out of the carb.
> 
> The PO did a lot of modifications including: removing all emissions 
> control equipment (I have no idea how it passed the test), installing 
> a Weber Carb, and, a recent discovery, a contactless electronic 
> ignition system.
> 
> The car won't even start at this time. I replaced the distributor cap 
> and rotor, and fixed the pickup on the contactless ignition system. 
> The plugs are sparking and the engine is turning - it just won't fire 
> up. The choke and throttle on the carb both check out.
> 
> A strange happening: occasionally the carb spits fuel out of the air 
> intake as the engine is being cranked.
> 
> Any thoughts?
> 
> Brian Wancho
> brian@whc.net
> 


<Prev in Thread] Current Thread [Next in Thread>