Re: On More '71 B Tranny Question...

[VRHS43A@prodigy.com (MR JOHN H TWIST)]

JIM!  The front cover on the all synchro gearbox does have a bit of "flex"
to it, so you can certainly use 0.012" of shims.  Better to squish that
front bearing a bit tight than have it too loose (unlike valve lash). You
can use the shims, you can use a prick punch and make a jillion dimples in
the front cover, whatever.  I use clear silicone RTV sealant on gearbox
gaskets -- SPARINGLY!!!  Good luck  John Twist