York,
I didn't need to change the oil in the tranny yet. But I bought the oil
just in case I feel brave and do it on a weekend. It is 90WT as I think I
read it in a manual. If this is not the right stuff I don't want to put
that goo in there. It's still running. At home I'll check _what_ I was
reading in this manual (or thinking while pretending to read).
Cheers,
Gus
=====================================================
Agustin de la Calle '71 MG Midget (red)
Boston, MA delacall@bcmp.med.harvard.edu
=====================================================
On Sun, 9 Apr 1995 Yorkus@aol.com wrote:
> > Motorhead (free catalog - (703) 527-3140) suggests running 90
> > WT in theribcase, despite what the manual sez. Any comments?
>
> I don't think it would be a good idea to try this one. I put 80w-90w gear
> lube in mine not knowing what was supposed to be in it. The end result was a
> ruined roller bearing between the input shaft and the output shaft. My guess
> is it is too thick to get in there and do a good job of lubing this area.
>
> York Powell
> 72' Midget
>
|