mgb-v8
[Top] [All Lists]

Re: [Mgb-v8] For the sake of clarity (Shortened water pump)

To: <GrayTesla@aol.com>, <dkern@napanet.net>
Subject: Re: [Mgb-v8] For the sake of clarity (Shortened water pump)
From: "Carl Floyd" <cmfloyd@chartertn.net>
Date: Sat, 30 Aug 2008 13:32:02 -0400
Darius,

Thanks. I wasn't copied on that email. I, personally, wouldn't do it that way.
That's part of the fun of these conversions. Every one does things their own
way.

Carl

  ----- Original Message -----
  From: GrayTesla@aol.com
  To: cmfloyd@chartertn.net ; dkern@napanet.net
  Cc: mgb-v8@autox.team.net
  Sent: Saturday, August 30, 2008 11:09 AM
  Subject: Re: For the sake of clarity (Shortened water pump)


  <<"...originally it was stated that no change in either pulley was needed.
"
    Still looking for that reference.

    Carl>>

  Carl,

  I'm not sure what the words, "No change to pulley" would convey to you but
when Barrie posted those words and then added, "The unit is just made shorter
by machining the body  back and machining out for the bearing and cutting the
axle back and retaining the thing onto which the pulley is bolted"  the clear
impression to me, David and possibly others, was that there were no custom
pulleys needed.  THAT is the reference.

  I hope this clears the matter of WHERE to find the reference (See complete
original message below).

  You may have missed that posting or you may have read it differently but
please understand that for some of us we took the words literally.

  The pictures you posted cleared the matter for me and I believe Barrie's
shortened pump to be a very worthwhile addition for those who encounter
clearance problems. The intent is not, and was not, to argue or disparage, but
simply to inquire for the sake of clarity. My Inquiry has been satisfied and
by way of this posting I certainly hope yours has been as well.


  Darius

  -----Original Message-----
   From: Barrie Robinson <barrie@look.ca>
   To: graytesla@aol.com
   Sent: Thu, 28 Aug 2008 6:48 am
   Subject: Re: [Mgb-v8] Shortened water pump
  >
  > Darius,
  >
  > No change to pulley. The unit is just made shorter by machining the body
  > back and machining out for the bearing and cutting the axle back and
  > retaining the thing onto which the pulley is bolted. See photo
  >
  > [demime 1.01d removed an attachment of type image/jpeg which had a name of
  > ShortPumpSide.jpg"; x-mac-type="4A504547"; x-mac-creator="4A565752]
  > _______________________________________________





      ----- Original





-----------------------------------------------------------------------------
-
  It's only a deal if it's where you want to go. Find your travel deal here.
_______________________________________________
Support Team.Net  http://www.team.net/donate.html

Mgb-v8 mailing list


Mgb-v8@autox.team.net
http://autox.team.net/mailman/listinfo/mgb-v8

<Prev in Thread] Current Thread [Next in Thread>