mgb-v8
[Top] [All Lists]

Re: [Mgb-v8] Fwd: Shortened water pump

To: <barrie@look.ca>, <graytesla@aol.com>
Subject: Re: [Mgb-v8] Fwd: Shortened water pump
From: "Carl Floyd" <cmfloyd@chartertn.net>
Date: Thu, 28 Aug 2008 15:43:14 -0400
Maybe this article will help:

http://www.britishv8.org/Articles/Shortie-Water-Pump.htm


----- Original Message ----- 
From: <graytesla@aol.com>
To: <barrie@look.ca>
Cc: <mgb-v8@autox.team.net>
Sent: Thursday, August 28, 2008 1:57 PM
Subject: [Mgb-v8] Fwd: Shortened water pump


> Barrie,
>
> First, thanks for the quick response. However, I'm still not sure my 
> question was understood.
>
> I've looked at the picture of the?modified water pump and?a 3 inch thick 
> unit?would indeed benefit my application.
>
> As you stated it appears that the body of the water pump has been machined 
> on its "engine side" and that the protruding nose of the shaft have been 
> machined off. The water pump pulley mounting flange has been pressed 
> toward the body of the pump and the overall change offers a considerable 
> savings in length.??
>
> Now for the difficulty.??Since the pulley?mounting flange has been moved 
> toward the engine and with the pump body itself machined to reduce its 
> overall thickness, the pulley, when mounted, would be in a different plan 
> than the crankshaft drive pulley.... unless I'm missing something. Such a 
> misalignment would induce drive belt flip off.? Can you enlighten me 
> further? I am trainable.
>
> Darius
>
>
>
> -----Original Message-----
> From: Barrie Robinson <barrie@look.ca>
> To: graytesla@aol.com
> Sent: Thu, 28 Aug 2008 6:48 am
> Subject: Re: [Mgb-v8] Shortened water pump
>
> Darius,
>
> No change to pulley.? The unit is just made shorter by machining the body 
> back and machining out for the bearing and cutting the axle back and 
> retaining the thing onto which the pulley is bolted.?? See photo
>
> [demime 1.01d removed an attachment of type image/jpeg which had a name of 
> ShortPumpSide.jpg"; x-mac-type="4A504547"; x-mac-creator="4A565752]
> _______________________________________________
_______________________________________________
Support Team.Net  http://www.team.net/donate.html

Mgb-v8 mailing list


Mgb-v8@autox.team.net
http://autox.team.net/mailman/listinfo/mgb-v8

<Prev in Thread] Current Thread [Next in Thread>