Gents,
I have the bottom end of my engine out at the balancing shop; I also need to
order a cam for the new engine. Unfortunately, before I stripped everything
down, I forgot to measure piston to valve clearance. I am using 38cc heads
(10.75:1) and stock flat top pistons (the ones without the valve reliefs).
In a stock engine, how much valve lift can it safely support.
Thanks,
James Nazarian
71 MGBGT-V8
71 MGB Tourer
87 325es
///
/// mgb-v8@autox.team.net mailing list
/// Send admin requests to majordomo@autox.team.net
/// Send list postings to mgb-v8@autox.team.net
/// Edit your replies! If they include this trailer, they will NOT be sent.
///
|