Seats

[Barrie Robinson <barrie@look.ca>]

Gentlemen,

Thank you all very much for your sage advice.  I found a derelict MGB 
rusting away and used a camera to photo the under seats.   So now I have a 
photo of an actual, probably origina, set up.  I discovered that I was all 
wet and when I changed to what was in the photos all went well (well, 
comparatively!)  The advice of one lister to use plastic ties to hold bits 
together worked well.   One small problem was that as I have put down my 
own brand of sound proofing I had to use long bolts - which then stuck out 
underneath as it compressed the foam.  So now I have to cut bolts in situ - 
but no big deal!!

The chrome handle goes nearest the tunnel, the back-flat latch and the 
back-forward latch are away from the tunnel.    This gleaned from official 
photos.

I am proud to say I now have a seat installed and now know how to do it - 
seat installation that is

Once again, my many thanks to the noble band!

Barrie Robinson
705-721-9060
MGB GT V8 in the making
Aston Martin DB 2/4 MkII in the wings

Purveyor of O-ring kits for Smith and Jaeger gauges
------- and of stainless steel mesh grilles for MGBs
------- and of bitumastic soundproofing 
///
///  mgb-v8@autox.team.net mailing list
///  Send admin requests to majordomo@autox.team.net
///  Send list postings to mgb-v8@autox.team.net
///  Edit your replies!  If they include this trailer, they will NOT be sent.
///