Hi gang,
Has anybody removed a 14 bolt head on a Rover 3.5 without pulling the
engine. I'm taking off the passenger side head to get some machine shop work
done
on it. The external bolts are obstructed by the exhaust manifold - I have
the block hugger type with the metal bar between the ports. I'm working on
removing the exhaust manifold now, but it looks to me that there is little
chance there is enough room to lift the header up out of the engine
compartment
once I get it loose from the head and the exhaust piping. If any of you have
done this and can let me know it was successful and perhaps a trick or two to
doing it, I would appreciate it. If you send a phone number, I'd be happy to
call you to talk about it.
Safety Faster.....with a V8,
Rick
///
/// mgb-v8@autox.team.net mailing list
/// Send admin requests to majordomo@autox.team.net
/// Send list postings to mgb-v8@autox.team.net
/// Edit your replies! If they include this trailer, they will NOT be sent.
///
|