Hi All,
I am putting a few finishing touches on my car and ran into a clearance
problem for the radiator and fan. I have a 74 1/2 B which was but no longer
is a rubber bumper car with the radiator close to the old engine vs. the
radiator forward on the later models. I had supports made for the new
radiator and mounted them in place where they are on later model cars.
I don't remember reading or hearing about this , but I believe I need to cut
away part of the body where the old oil cooler was mounted for clearance to
the radiator and fan. I am using the perma cool high volume electric fan.
Can anyone shed any light on this subject?
Thanks,
Al Dufault
///
/// mgb-v8@autox.team.net mailing list
/// Send admin requests to majordomo@autox.team.net
/// Send list postings to mgb-v8@autox.team.net
/// Edit your replies! If they include this trailer, they will NOT be sent.
///
|