On the factory V8, at least, the base of the timing cover is flush with the
bottom of the crankcase so the sump gasket goes all the way round sealing to
both.
PaulH.
----- Original Message -----
From: "Al Dufault" <adufault@nycap.rr.com>
To: "MGB-V8" <MGB-V8@autox.team.net>
Sent: Sunday, December 28, 2003 5:18 PM
Subject: Buick timing cover
> There is a small gap between the base of the timing cover
> and the oil pan that the pan gasket doesn't fill. What do most use for
this?
///
/// mgb-v8@autox.team.net mailing list
/// Send admin requests to majordomo@autox.team.net
/// Send list postings to mgb-v8@autox.team.net
/// Edit your replies! If they include this trailer, they will NOT be sent.
///
|