mgb-v8
[Top] [All Lists]

RE: Brakes - Baking Plates

To: "'Mclean, John R'" <JohnRMclean@eaton.com>, mgb-v8@autox.team.net
Subject: RE: Brakes - Baking Plates
From: "Dodd, Kelvin" <doddk@mossmotors.com>
Date: Wed, 4 Jun 2003 08:40:10 -0700
Reply-to: "Dodd, Kelvin" <doddk@mossmotors.com>
Sender: owner-mgb-v8@autox.team.net
John:

Wire wheel, steel wheel are the same.  I'm pretty sure banjo is different
than tube, but I don't have conclusive proof.

Roadster and GT are the same backing plate, but the wheel cylinder locating
pin hole is in a different location.  Very easy to redrill, so not a
problem.

My stuff is all packed away, and I'm heading out to VIR tomorrow, but if you
don't have any luck by next week I can help you.


Kelvin.



> -----Original Message-----
> From: Mclean, John R [mailto:JohnRMclean@eaton.com]
> Sent: Wednesday, June 04, 2003 7:00 AM
> To: mgb-v8@autox.team.net
> Subject: Brakes - Baking Plates
> 
> 
> Can anyone confirm if the wire wheel brakes/backing plates 
> for a roadster are the same as for a solid wheel? Also are 
> the banjo axle plates the same as for the tube axle. 
> 
> Thanks
> John 

///
///  mgb-v8@autox.team.net mailing list
///  Send admin requests to majordomo@autox.team.net
///  Send list postings to mgb-v8@autox.team.net
///  Edit your replies!  If they include this trailer, they will NOT be sent.
///


<Prev in Thread] Current Thread [Next in Thread>