mgb-v8
[Top] [All Lists]

RE: master cylinder clutch master cyl brackets

To: <mgb-v8@autox.team.net>
Subject: RE: master cylinder clutch master cyl brackets
From: "Larry Hoy" <list@marketvalue.net>
Date: Thu, 22 May 2003 21:19:36 -0600
In-reply-to: <2003522125912.350972@pavilion>
Reply-to: "Larry Hoy" <list@marketvalue.net>
Sender: owner-mgb-v8@autox.team.net
Have you taken a look at the Tilton system?  Check the Jegs or Summit
sites.

Larry Hoy

> -----Original Message-----
> From: owner-mgb-v8@autox.team.net 
> [mailto:owner-mgb-v8@autox.team.net] On Behalf Of John Schaner
> Sent: Thursday, May 22, 2003 1:59 PM
> To: mgb-v8@autox.team.net
> Subject: master cylinder clutch master cyl brackets
> 
> 
> hello to all, i have a modified 58 mga, it has a 2003 firebird 3800 
> vy and 5 speed manual trans. 
> For braking in the front i am using willwood calipers the rear is a 
> narrowed 9 inch ford  12 x 2 1/2 drum brakes  3.50 gears set posi 
> with adaptors allowing the use of the wire wheels. 
> 
> i am using and original twin bore master cylinder for the brake and 
> clutch
> 
> my understanding is that later model twin cam etc cars has separate 
> masters for the clutch and brakes.
> 
> does any one who where i can buy the brackets for these master 
> cylinders, or have any suggestions?
> 
> I would feel more comfortable separating the clutch and brake 
> hydraulic circuits
> 
> thank you to all
> 
> also as i am new to this mailing list, is there a way or a place i 
> can look at older post to the list
> 
> Thanks
> 
> John

///
///  mgb-v8@autox.team.net mailing list
///  Send admin requests to majordomo@autox.team.net
///  Send list postings to mgb-v8@autox.team.net
///  Edit your replies!  If they include this trailer, they will NOT be sent.
///


<Prev in Thread] Current Thread [Next in Thread>