Rear Axle

[John Renaud <j.p.renaud@worldnet.att.net>]

Hi, John Mclean
        I used 52.00 wheel mounting surface to wheel mounting surface
for my overall width on my Ford 8.8" rear axle. My disk brakes were the
controlling factor in the minimum width overall on the axle.
I had the rear axle narrowed at Moser Engineering:
                www.moserengineering.com
They are at 102 Performance Drive, Portland, Indiana 47341
PH. 219.726.6689
Regards, Jack Renaud

///
///  mgb-v8@autox.team.net mailing list
///  Send admin requests to majordomo@autox.team.net
///  Send list postings to mgb-v8@autox.team.net
///  Edit your replies!  If they include this trailer, they will NOT be sent.
///