Paul:
I think Neil is trying to get the car back on the road without
replacing the braided fuel line and steel line to tank.
On the original car the line from the tank has a threaded fitting
that connects to a banjo at the pump. The outlet braided hose has a crimped
banjo fitting and slides onto the steel line to carb.
I've suggested to other folk that the outlet hose with banjo is a
good hose to use if the inlet steel line has had the threaded fitting cut
off.
Alternately the late model barbed fittings can be used with regular
fuel line as a cheaper alternative.
K.
>
> From the parts list the V8 appears to only ever had flex pipes with a
> crimped banjo fitting, although that is how I remember my 73
> roadster too.
> However the list shows 2 of the above required - not
> surprisingly - but also
> shows a banjo fitting with a threaded end for a pipe, a bolt
> and washer. It
> says 4 washers, 2 bolts, but only 1 banjo.
>
> PaulH.
///
/// mgb-v8@autox.team.net mailing list
/// Send admin requests to majordomo@autox.team.net
/// Send list postings to mgb-v8@autox.team.net
/// Edit your replies! If they include this trailer, they will NOT be sent.
///
|