Folks at world,
Just a snippet of information.
I was fitting my new flywheel to my new RPi Rover 3.5L and noticed the
grade 8 bolts supplied were not shouldered. I checked with RPi in England
and they said normal practice is shouldered only on automatics. But it
seems inelegant so I pressed the point and they advised ARP 100-2801 bolts
would do the trick. I got Mr Gasket equivalents which are also
shouldered. Not an earth shaking thing but I feel if you do it right you
do it right!!
///
/// mgb-v8@autox.team.net mailing list
/// Send admin requests to majordomo@autox.team.net
/// Send list postings to mgb-v8@autox.team.net
/// Edit your replies! If they include this trailer, they will NOT be sent.
///
|