mgb-v8
[Top] [All Lists]

Re-torquing heads

To: "MGB Newsgroup" <mgb-v8@autox.team.net>
Subject: Re-torquing heads
From: "Bruce" <brucemills@dccnet.com>
Date: Mon, 23 Apr 2001 20:43:38 -0700
Reply-to: "Bruce" <brucemills@dccnet.com>
Sender: owner-mgb-v8@autox.team.net
Now that I have fired up my Rover 3.5 and bedded the cam I was wondering
about re-torquing the head bolts? Do they have to be re-torqued since it is
an aluminium head? And if so is the proper sequence is to back them of a
little and then re-torque or just re-torque? Not a highly technical question
but I figure I might as well do it right.

Bruce

///
///  mgb-v8@autox.team.net mailing list
///  Send admin requests to majordomo@autox.team.net
///  Send list postings to mgb-v8@autox.team.net
///  Edit your replies!  If they include this trailer, they will NOT be sent.
///


<Prev in Thread] Current Thread [Next in Thread>
  • Re-torquing heads, Bruce <=