Craig, A stiff sway bar like that in the rear wont let the car work. It will
skate its way around everything. I would suggest a panhard bar and maybe
some direct links from the chassis to the spring centers. Scarp the sway bar.
Joe Potter
Eugene, Oregon USA
www.hometown.aol.com/capaciousmg/vasale/vamain.html
http://hometown.aol.com/jtpaki/index.html
In a message dated 2/26/2001 5:05:27 PM Pacific Standard Time,
CraigFaubel@aol.com writes:
> My 71 B is getting Ford 302. When I started this project years ago, I
> bought
> a supposedly matched set of sway bars from Addco company, and I'm now
> putting
> them in. Does anyone have driving experience with a chrome bumpered B with
> bars like these? The front one is 7/8" and the rear is 3/4" thick. I
> still
> have the standard valving in the lever shocks and standard rate springs.
> Rear end is a heavier unit - a Plymouth 8-3/4", narrowed.
///
/// mgb-v8@autox.team.net mailing list
/// Send admin requests to majordomo@autox.team.net
/// Send list postings to mgb-v8@autox.team.net
/// Edit your replies! If they include this trailer, they will NOT be sent.
///
|