Bruce-
Any shop that makes up hydraulic lines can do this. Look for a fork lift repair
company, as a for instance. The threads in all the kits I have seen are either A
& N, or simple pipe thread. If you have rubber hose made up, the fittings should
be much less than $25.00. Summit sells the A & N fittings for substantially less
as well. The shop should be able to supply either. A shop local to me in
Newington, Va, was able to make up lines with British Pipe thread & metric with
no problem.
Jim Stuart
Bruce wrote:
> I am at that point where I have mounted the remote oil filter and I am now
> trying to get the lines made up. I require several feet of hose which is
> $5.00 per foot in my area. The 90 degree fitting are about $25.00 each. Are
> these threads more or less universal? The original MGB hose (which are not
> the right length) fittings fit the new remote oil filter, so I guess they
> are universal? Is there a place where I can get oil lines made up?
>
> Bruce
///
/// mgb-v8@autox.team.net mailing list
/// Send admin requests to majordomo@autox.team.net
/// Send list postings to mgb-v8@autox.team.net
/// Edit your replies! If they include this trailer, they will NOT be sent.
///
|