mgb-v8
[Top] [All Lists]

RE: Harmonic balancer / steering rack clearance

To: "MG V8 List" <mgb-v8@autox.team.net>, "Kevin Brown" <MGTRAutoXr@sprintmail.com>
Subject: RE: Harmonic balancer / steering rack clearance
From: "Larry Hoy" <larryhoy@prodigy.net>
Date: Sat, 6 Jan 2001 10:57:43 -0700
In-reply-to: <NCBBJIKHPENAOIEIMKILGEECFGAA.larryhoy@prodigy.net>
Reply-to: "Larry Hoy" <larryhoy@prodigy.net>
Sender: owner-mgb-v8@autox.team.net
I gotta tell the list that this message is really from Kevin.  He couldn't get 
it to go to the list, sent it to me, and I passed it
on.

Larry Hoy

>-----Original Message-----
>From: owner-mgb-v8@autox.team.net [mailto:owner-mgb-v8@autox.team.net]On
>Behalf Of Larry Hoy
>Sent: Saturday, January 06, 2001 10:26 AM
>To: MG V8 List; Kevin Brown
>Subject: Harmonic balancer / steering rack clearance
>
>
>I sent this last night to the list, but it never showed up, even though
>the messages that I sent before and after it did show.  Since I do need
>some input I am sending it again.
>
>I need help!  I've got my engine sitting in my car right now and have a
>question about how the harmonic balancer should be located in relation
>to the steering rack.  The car is a '78 MGB body shell (that has been
>converted to chrome bumpers) with a stock '78 MGB cross member, steering
>rack and suspension.  I am using a stock '62 Buick 215 V8, a stock Buick
>3-4 bell housing and a T-5 transmission from an '84 Camaro.  I am using
>TS Import Auto motor mounts and transmission mounts.  Right now the rear
>of the Buick harmonic balancer is about 1/4 inch above the center of the
>steering rack.  How does this compare to your successful
>installations??  Even though I'm using a stock Buick 4 bbl intake with
>an Edelbrock carb I'm concerned that I won't have enough hood clearance
>for the air cleaner.  It looks like that if I move the motor forward an
>inch (so that the harmonic balancer is in front of the steering rack) I
>could lower the motor another inch.  But then would I interfere with the
>radiator (I'm planning on using an MG V8 radiator).  I don't have the
>radiator mounts welded in right now (the DPO had removed them) so it is
>a little hard to check out the clearance.  If you all could look at your
>cars and let me know where the harmonic balancer is in relation to the
>steering rack I would greatly appreciate it!!  I posted links to some
>pictures
>yesterday so that I can show you what my project looks like.
>Take care.
>
>Kevin Brown
>Odessa, MO

<Prev in Thread] Current Thread [Next in Thread>