mgb-v8
[Top] [All Lists]

Re: Torque values

To: jamesnazarian@netzero.net
Subject: Re: Torque values
From: BlkfxdWG@aol.com
Date: Thu, 30 Nov 2000 16:41:33 EST
Cc: mgb-v8@autox.team.net
Reply-to: BlkfxdWG@aol.com
Sender: owner-mgb-v8@autox.team.net
In a message dated 11/30/2000 12:35:48 PM Eastern Standard Time, 
jamesnazarian@netzero.net writes:

<< Can anyone give me torque numbers for the 
 flywheel to crank bolts
 preasure plate to flywheel bolts
 and the belhousing to engine bolts
 all on a 63 Buick Special 215 with factory 4-sp and bellhousing
  >>
James, here's what I used ( in ft/lbs):

flywheel to crank bolts   50-60
pressure plate to flywheel bolts  (depends on bolt size - my flywheel had 2 
different size bolt holes - used the small one)
the bellhousing to engine bolts   upper housing to block 30-35     lower 
housing to block & to upper housing 20-25

<Prev in Thread] Current Thread [Next in Thread>