LArry,
I made a U shaped bracket attached to the underside of the shelf
for the pivot point of the pedal. I bolted it to the shelf with
two 1/4 inch bolts. I also made a small plate for the top of
the shelf for additional reinforcement. I relocated the
accelerator cable guide to the same position as on a rubber
bumper car. I also used a pedal from a 75 or later car. The
cable I'm using is the adjustable kind from a later car.
Hope this helps.
Al Wulf
'67 MGB-V8 under construction
> Many of you know that I have made a big push to get the V8
done. I am getting
> closer but have another question.
>
> Remember this is a 1969 MGB which requires removal of a
portion of the firewall,
> which meant removal of the gas pedal pivot point. It is now
time to put back
> some sheet metal and address the gas pedal.
>
> The sheet metal I can handle, but I'm looking for suggestions
on the gas pedal.
>
> How have you handled this?
>
> Larry Hoy
>
|