Mike:
I am using the rubber gaskets on a Holley 2300. They work really
well. I am going to get them for my 3900 too.
The 2300 is on a 2.8L V6 in an MGB. So far I have had no leakage
problems.
Kelvin.
> -----Original Message-----
> From: Michael Hartwig [mailto:mhartwig@cbu.edu]
> Sent: Tuesday, August 31, 1999 7:07 PM
> To: Mogfrog1@aol.com; mgb-v8@autox.team.net
> Subject: Re: Holley Carb.
>
>
> Could you have read the number wrong. I'm looking in my Haynes Holley
> manual, and don't see a 1551. They start at 1848. Most
> numbers are in the
> 4k-9k range.
>
> For those of you that have used the Holley, and had them
> leak. Did you use
> the buna rubber gaskets or the paper type? I rebuilt mine a
> few months back
> and used the rubber ones. It seemed to make a good seal.
> I haven't tried it out yet though.
>
> Mike
>
> >
> ><< Hi V8's. I have located a Holley carb, list 1551, small
> bore 4-barrel.
> Jim
> >and anyone else with info please let me know if this is
> suitable for the
> 215
> >Buick with Buick 4-barrel manifold. thanks
> > John Wright
> > '80 LE with 215 in bits. >>
> >
>
>
|