Mike-
Rubber bumper B with 1971 front crossmember, 1-1/4" clearance on both a Rover &
Buick pan.
Federal Mogal "Low Rider" air cleaner w/ 2" K & N element, Carter 500, Buick
4bbl intake manifold.
Engine is set back the max using Towey's A/C mounts. Engine could be set lower,
but not necessary.
Jim Stuart
1974-1/2 BGT/ 4.2 Rover
Michael Hartwig wrote:
> I'd like to get some info from the people who have finished their installs.
> I need the distance between the top of the front crossmember to the bottom
> of the oil pan, a rough guess would do. I don't imagine that the oil pan
> for a rover is much different than one for the Buick, if so then tell me.
> If you reply, could you also give me your manifold/carb/air cleaner combo.
>
> Thanks
> Mike
|