mg-t
[Top] [All Lists]

Re: [Mg-t] TC Question

To: Gable, Gerry <GABLEG@ecu.edu>, mg-t@autox.team.net <mg-t@autox.team.net>
Subject: Re: [Mg-t] TC Question
From: "lawrie" <lawrie@britcars.com>
Date: Tue, 06 Sep 2016 07:34:05 -0800
Delivered-to: mharc@autox.team.net
Delivered-to: mg-t@autox.team.net
References: <F0552312647DC949AC4CC9399848964D012F0E6796@Moe.intra.ecu.edu>
Gerry,

The rubber strip is nailed in place with the rounded portion overlapping the 
metal cowl. The flat portion sits snugly on the wood, and you cut out a section 
of that in the center, the same length as the chrome outer hood strip support.

Lawrie

>  -------Original Message-------
>  From: Gable, Gerry <GABLEG@ecu.edu>
>  To: mg-t@autox.team.net <mg-t@autox.team.net>
>  Subject: [Mg-t] TC Question
>  Sent: 05 Sep '16 20:55
>  
>  
>  
>  Can anyone tell me if I have to trim the rubber strip (cowl to Hood)
>  where the center. strip (center hood) bar is mounted on a TC? Also on
>  which sides are the Horn and Fog lights mounted, I have seen them both
>  ways.
>  Thanks
>  Gerry
>  
>  -------------------------
>  ______________________________________________
>  
>  Mg-t@autox.team.net
>  Donate: http://www.team.net/donate.html
>  Suggested annual donation $11.47
>  Archive: http://www.team.net/archive
>  Forums: http://www.team.net/forums
>  Unsubscribe/Manage:
>  http://autox.team.net/mailman/options/mg-t/lawrie@britcars.com
>  
>  
______________________________________________

Mg-t@autox.team.net
Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [Mg-t] TC Question, lawrie <=