Hey all, my TD also has those stiffener strips welded in place. Tom
Sent from my iPhone
> On Aug 22, 2016, at 10:25 PM, Stan Fickes <spridget@gmail.com> wrote:
>
> While examining my front fenders in preparation for some metalwork, my welder
> pointed out a ~3/8" wide metal strip tacked (welded or brazed every six
> inches or so) to the inside of each rolled edge on the outside edge of each
> fender. He thought that it was not a factory item, but something added. I can
> post pictures if it would be helpful. I'm not aware of any MGTDs closer than
> an hour, so would someone please reach behind the rolled edge of their front
> fender above the tire and tell me if there's a strip or just the rolled edge?
> They run from just behind the curved front end to nearly the rear end of the
> fender.
> Thanks!
> Stan Fickes
> Peacham, Vermont
> ______________________________________________
>
> Mg-t@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/mg-t/tmcnam4510@aol.com
>
______________________________________________
Mg-t@autox.team.net
Archive: http://www.team.net/archive
|