Re: [Mg-t] Brake line fittings

[Charlie Baldwin <mgcharlie@comcast.net>]

Al,
That is a common problem.  Sometimes they don't want to come apart 
because of that happening.  When making new lines, I have reused the 
original nuts and ground them down so that they fit correctly in place.  
And touching them up with a file should hurt nothing, though make sure 
that you get it nice and clean before reassembling.
Charlie


On 8/20/2013 9:18 PM, pops502 wrote:
> I am having a problem re assembling the metal brake lines at the front tee.The
> tubing nut has a shoulder area before the threads start.Has anyone had a
> problem with this shoulder becoming slightly flared preventing it from being
> reassembled? Can the area be touched up carefully with a file?
>                 Al
> ______________________________________________
>
> Mg-t@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/mg-t/mgcharlie@comcast.net
______________________________________________

Mg-t@autox.team.net
Archive: http://www.team.net/archive