Re: [Mg-t] Been stripping (paint

[Bud Krueger <budkrueger@comcast.net>]

Rick,

Maybe you need to slow up a bit.  For instance, the section of the hinge 
pillar that is mortised into the bottom main side isn't much more than a 
quarter inch thick.  The wooden components of the TD's frame have a 
symbiotic relationship that is important to the tub's rigidity and 
support.  These 1/8 inches can be the difference in doors latching or 
popping open.  Do you have sort of deadline that you're working toward?

Bud
Richard Lindsay wrote:
> The metal is rusted away and 'some' of the wood is decayed.  However,
> this timber is about 2" thick so the 1/8" of wood that's
> surface-eroded, is not (in my opinion) a real issue.  When poked with
> a screwdriver, the wood is sound everywhere.  I'll vacuum this whole
> area out, seal the timber with a wood preservative then replace the
> metal.
______________________________________________

Mg-t@autox.team.net
Archive: http://www.team.net/archive