mg-t
[Top] [All Lists]

Re: [Mg-t] Generator pulley nut

To: johnsfolly@gmail.com
Subject: Re: [Mg-t] Generator pulley nut
From: "mgbob@juno.com" <mgbob@juno.com>
Date: Mon, 7 Mar 2011 22:21:22 GMT
  An oil-filter strap wrench is one way, or the rubber-strap equivalent
wrench, but avoid sticking a screwdriver into the fins of the fan as that's a
sure way to break the cast finned fans that are sometimes seen, and will
probably bend the steel fins also.Bob

---------- Original Message ----------
From: JohnD <johnsfolly@gmail.com>
To: MG T List <mg-t@autox.team.net>
Subject: [Mg-t] Generator pulley nut
Date: Mon, 7 Mar 2011 16:20:58 -0500

What is the correct way to keep the armature on the generator "locked" when
trying to remove the pulley nut?
I want to be able to swap the pulley and fan to a spare gennie.
Thanks in advance.
John Deikis
--
*Running the Rallye to Reno in a '53 MG TD*
Click on MGDrive for CURE <http://www.kidscure.blogspot,com/>
______________________________________________

Mg-t@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/mg-t/mgbob@juno.com
______________________________________________

Mg-t@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>