Bob, the starter knob should be just as flush as the choke knob. The
end of the cable can be trimmed where it actuates the starter switch.
Bud Krueger
http://www.ttalk.info/
Bob Donahue wrote:
> The starter knob on my TD sticks out 2 inches in the non-pulled position. This
> just doesn't look right to me. Should it be flush against the dash, or should
> there be some clearance? I assume the clearance is adjusted by shortening the
> cable, correct me if I'm wrong.
>
> Bob Donahue (Still Stuck in the '50s)
> Email - bobmgtd@comcast.net
> Cars: 52 MGTD - #17639
> 71 MGB - #GHN5UB254361
> Member: NEMGTR #11470
> NAMGBR # 7-3336
> Hoosier MGB Club
> Olde Octagons of Indiana
> ______________________________________________
>
> Mg-t@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
>http://autox.team.net/mailman/options/mg-t/budkrueger@comcast.net
______________________________________________
Mg-t@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|