Hi All,
Last fall just before storage I lost the brakes on the TD and put off the
bleeding project til this spring.
All went well in the bleeding process and my brakes pumped up well and very
stiff to the push on the brake pedal.
Went out for a cruise today and brakes worked fine the first few pushes on the
pedal and then all the way to the floorboard the pedal went, good thing for a
convenient emergency brake !!!
Then after letting up on pedal they were good again for the next few times and
then again all the way to the floorboard. It then seemed like they would be
good for 2, 3 or 4 times and then all of a sudden the pedal would bottom out
but right after letting up on the pedal the next push would be good.
Any suggestions ?? Seems like master cylinder problem, not sure if it is bad,
needs parts or something else ....
I was also looking on the Moss site at master cylinders and it seems it
depends how old you cylinder is what parts are available. Are there other
outlets for master cylinders or parts beside Moss ??
John in IL
______________________________________________
Mg-t@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|