Good morning listers--
The TF engine diagram in the factory service manual shows the fan-shaped
extension on the bottom of the oil pick-up in the sump as ending several
inches short of the forward end of the sump. We recently bought at a flea
market an oil pick-up with that extension. Aside from the extension (and the
fact that it's center-, not side-, located), it's identical to the one in my
TD-----but when placed in a TD/TF sump, it comes to within <1/2" of the front
of the sump. The bottom of the fan-shaped extension is marked:
168706
[triangle]
DF
Can anyone tell us whether this is indeed TF (and thus the drawing is
inaccurate)? If not, any ideas what it's from?
Many thanks!
Sarah Carr
TD3942EXLU in PA
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mg-t@autox.team.net
http://autox.team.net/mailman/listinfo/mg-t
Archives at http://www.team.net/archive
|