Oppps!
For "regular silver" read "regular solder"
Clive
=================================
----- Original Message -----
From: "Clive Sherriff" <clive.sherriff@ntlworld.com>
To: <mg-tabc@yahoogroups.com>; "John Seim" <kingseim@earthlink.net>; "Chip
Hellie" <chiphelli@yahoo.com>
Cc: "MG" <Mg-t@autox.team.net>
Sent: Saturday, May 30, 2009 8:57 AM
Subject: Re: [Mg-t] [mg-tabc] MG T series push rods
> Silver solder would be the best solution probably -
> a lot stronger than regular silver. Although a hotter
> process, it's not hot enough to alter the push rod's
> metaluric structure which Brazing or Welding would
> do.
>
> Clive
> Oxford UK
==================================
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mg-t@autox.team.net
http://autox.team.net/mailman/listinfo/mg-t
Archives at http://www.team.net/archive
|