And if you want to be really fancy you could go with stainless bolts and
nuts which are available at good hardware stores or West Marine outlets.
John Quilter
Brisbane, California
----- Original Message -----
From: "Bob Howard" <mgbob@juno.com>
To: <sumton@sbcglobal.net>
Cc: <Mg-t@autox.team.net>
Sent: Friday, May 15, 2009 5:39 AM
Subject: Re: [Mg-t] front hood screws/bolts
> The parts book does not detail this either.
> My car has flat-head machine screws through the bracket that have
> washers & nuts underneath, between metal and the rubber strip.
> Needle-nose pliers or tweezers are handy to hold the nuts in place to get
> the machine screws started.
> Bob
>
>
>
>
> On Thu, 14 May 2009 11:33:17 -0500 "oliver" <sumton@sbcglobal.net>
> writes:
> > i took the hood off because one of the chrome pieces was broken.
> >
> > there are nice big screws at the back of the hood, but little tiny
> > screw
> > headed bolts at the front, that don't seem to catch. were there
> > nuts and
> > they are now gone or do i need bigger bolts or what? i've looked at
> > the
> > moss catalong and i can't see a detail there.
> >
> > thanks.
> ____________________________________________________________
> Compete with the big boys. Click here to find products to benefit your
business.
>
http://thirdpartyoffers.juno.com/TGL2141/fc/BLSrjpTI97vkTtqZnv8l9wT15JLt0A6Y
mQr3Qn39TCHKTK6IFhncKAbMVos/
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> Mg-t@autox.team.net
> http://autox.team.net/mailman/listinfo/mg-t
>
> Archives at http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mg-t@autox.team.net
http://autox.team.net/mailman/listinfo/mg-t
Archives at http://www.team.net/archive
|