Phil Marino manufactures an aluminum oil filter adapter.
He uses aluminum billet, cross-drills the housing for correct oil flow.
Accepts original oil pipes.
He used to make two lengths, one for the TC, and one for the TD
(slightly taller).
He now makes only one length, which works for both the TC and TD.
His adapters have a groove machined in the outer case.The bracket on
the engine block, lower lip, fits into the groove, providing more
support
than just having the adapter clamped in the bracket.
He also makes a heavy duty filter strap for the TC. The TD's already
have a heavier strap than the TC's.
Phil also makes a one piece spin on adapter for the later style oil
pumps.
You can contact Phil by mail or phone, as he will never get a computer.
Or, you can work through me for Phil's products.
Phil Marino
16199 Hidden Cove Dr.
Riverside, CA 92503-0521
951-352-4419
John Seim
Irvine, CA
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mg-t@autox.team.net
http://autox.team.net/mailman/listinfo/mg-t
Archives at http://www.team.net/archive
|