Doug,
Might you have received the trim for a three-bow top, #252-408, instead
of #252-208 that you wanted?
Bob
On Thu, 31 Aug 2006 15:39:34 +1200 "Douglas Ormrod"
<Douglas.Ormrod@neurological.org.nz> writes:
> Hi again T typers
>
> a set of these plus screws from Moss (part # 252 208 for the two bow
> hood TD). Only trouble is that all of the vertical strips are too
> long by 1/2" to 1" - what ever combination I try they don't fit. My
> measurements indicate that from back to front of the car the
> vertical strips should be about 8 1/2", 9", 9" and 9 3/4" long. The
strips
> Moss sent are either 10 1/2" or 10 1/8" long. The horizontal strips are
> OK.
>
> I plan to take this up with Moss, but thought I would first ask if
> any of you had experienced a similar problem? If so what was the
> solution - can one shorten the strips?
>
> Cheers
>
> Douglas
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-t
|