Hi again T typers
Thanks to all who responded to my question re the wire frame for my front TD
side curtains - especially to those who offered to send me a pair - I have
gratefully accepted one of these offers.
Another problem has arisen. My original poor quality replacement side curtains
did not come with the chrome strips on the outside so I bought a set of these
plus screws from Moss (part # 252 208 for the two bow hood TD). Only trouble
is that all of the vertical strips are too long by =" to 1" - what ever
combination I try they don't fit. My measurements indicate that from back to
front of the car the vertical strips should be about 8 =", 9", 9" and 9 >
long. The strips Moss sent are either 10 =" or 10 1/8" long. The horizontal
strips are OK.
I plan to take this up with Moss, but thought I would first ask if any of you
had experienced a similar problem? If so what was the solution - can one
shorten the strips?
Cheers
Douglas
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-t
|