Hi,
Yes, there should be a wire stiffener. You can see the shape in the article
in ebay:
http://cgi.ebay.com/ebaymotors/MG-TD-Front-Side-Curtin-Stiffener_W0QQcmdZVie
wItemQQcategoryZ42611QQihZ014QQitemZ330021277410QQrdZ1
Well, ebay item 330021277410
and eventually bid for it.
Regards.
Jeszs
53 TD
-
-----Mensaje original-----
De: owner-mg-t@autox.team.net [mailto:owner-mg-t@autox.team.net] En nombre
de Douglas Ormrod
Enviado el: miircoles, 30 de agosto de 2006 6:48
Para: mg-t@autox.team.net
Asunto: sidescreen question
Hi T people
My trim guy is starting on my TD sidecreens. He is of the opinion that there
should be a wire frame inside the lower part of the front sidecreens - the
bit the flaps up so you can wave at the traffic behind. However, the ones I
took off (which were rather poorly made replacements) have no such frame and
I can't see anything listed in the Moss catalog or mentioned in the
restoration books. Should there be a frame or is it just fabric - perhaps
stiffened with board?
Thanks
Douglas
/
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-t
|