mg-t
[Top] [All Lists]

Re: TD Seat Installation / Another question

To: "Bob Donahue" <bobmgtd@insightbb.com>,
Subject: Re: TD Seat Installation / Another question
From: BeeJay U <yd3@nvc.net>
Date: Wed, 17 May 2006 01:15:28 -0500
It's the  only way you can slide the seat off the runners!

You can't slide the seat forward as the body gets narrower. You can't slide the 
seat straight back as the heal board is in the way. You have to lift the back 
of the runners and slide the seat over the luggage floor.
----- Original Message ---------------

Subject: Re: TD Seat Installation / Another question
   From: "Bob Donahue" <bobmgtd@insightbb.com>
   Date: Wed, 17 May 2006 00:49:45 -0500
     To: "Bill Snyder" <wtsnyder@bellsouth.net>
     Cc: "mg-t" <mg-t@autox.team.net>

1. Yes, the seat bottoms are attached only at the front to the T-bolt 
receptacles in the floorboard.

But, why are they hinged in the front?????? I can understand the hinge in 
back..

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/mg-t


<Prev in Thread] Current Thread [Next in Thread>