Hi Bob,
Actually, this started by my having installed new rear mounts after having
had the rear mount 'ring' rewelded. BTW, I have a new Moss-style mount coming
from Skip Kelsey.
Bud
Bob Howard wrote:
> Bud,
> I used the Moss part when I replaced mine. It fit fine and seems to be
> OK five years later. Check rear mounts while you are at this---mine were
> much more deteriorated than the front. With the new front mount (only)
> in place, the starting handle would not align with the crankshaft pulley.
> With new rear mounts in place, starting handle and engine line up as they
> should.
> Bob
>
> On Sun, 09 Mar 2003 19:05:43 -0500 Bud Krueger <budkrueger@earthlink.net>
> writes:
> > It looks as if I should replace my front engine mount of my TD while
> > I'm working in the area. I just discovered that there's a very big
> difference
> > in the pricing of Moss versus Abingdon Spares. Moss' Part Number
> 411-010
> > is listed at $15.50. Abingdon Spares wants $46.37 for their Part
> Number 03-001.
> > Can anybody shed some light on this one? TIA.
> >
> > Bud Krueger
> > 52TD
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-t
|