Re: Stripped Front Shock Bolt ==>> Tracy Tool address?

[Roadrunner@Post.com]

Thank you, Blake!

-------- Original Message --------
Subject: Re: Stripped Front Shock Bolt
Date: Thu, 16 Aug 2001 09:46:00 -0600
From: Bullwinkle <yd3@nvc.net>
To: Roadrunner@Post.com
References: <3B7B401B.335DA80@Post.com>

I used Google and found just an email address in the UK. 
TracyTools@aol.com

Blake
----------------------------------
-------- Original Message --------
Subject: Re: Stripped Front Shock Bolt {Two Possible Sources}
Date: Wed, 15 Aug 2001 21:51:36 -0500
From: Roadrunner@Post.com
To: mg-t@autox.team.net

        {Okay.  I Give Up: Where, pray tell, is "Tracy Tools," Ray?}

        The too obvious "www.TracyTools.com" does not exist, apparently.
        I've rummaged among an assortment of search engines looking for "Tracy 
Tools" online, with very little luck.

                Here are only three references coughed up by several searches 
upon "helicoil, bsf":

                        Armstrong Fastening Systems 
                        http://www.armstronghelicoil.co.uk/

                British Fasteners & Electroplating Kits
        http://www.mrcybermall.com/machine_tool_parts/link1.html

        "Threaded Fasteners FAQ v 7.2" by Mr. A. C. Pugh of [apparently] 
Sheffield
                http://www.raunds.demon.co.uk/faster.htm

----------------------------------
----------------------------------
-------- Original Message --------
Subject: Re: Stripped front shock bolt
Date: Wed, 15 Aug 2001 21:45:23 -0500
From: "Ray McCrary" <spook01@home.com>
To: "Bullwinkle" <yd3@nvc.net>, "Curt Strohacker"<strohacker@acadia.net>
CC: "mgt" <mg-t@autox.team.net>
References: 
<5.1.0.14.2.20010815203618.00a7e7a0@127.0.0.1><3B7B3B54.61F29693@nvc.net>

TracyTools carries a complete line of BW & BS helicoil kits. 
Why screw it up? ;-)
Best,
Ray McCrary
"Speed is Life;
of course Luck and Altitude
are helpful, too."
--------------------------------------------------
--------------------------------------------------
--------------------------------------------------
--------------------------------------------------
-------- Original Message --------
Subject: Do You Supply Repair Kits for BSF interior threads?
    Date: Thu, 16 Aug 2001 09:20:09 -0700
   From: Roadrunner@Post.com
      To: TracyTool@aol.com
    BCC: Bullwinkle <yd3@nvc.net>

Hello there, Tracy Tool:

    Do you supply repair kits for interior BSF threads?
    How about 8 mm x 1 mm (such as, I believe, are found in the engines of MG's 
built before 1955)?

    What other marvelous materials or services have you available to those who 
yearn to preserve and 
protect ancient British machinery on either end of the pond?

    Thank you so much.

///
///  mg-t@autox.team.net mailing list
///